SAS FAB1 Heat Gen Capacity Increase - Phase 2
📊Project Metrics
TDLR #TABS2022015890Project Closed
Project has been completed and closed
📋Scope of Work
Providing the design for the removal of heat gen FAN-A and replacing it with a new 75hp fan capable of 40,000cfm. The new 75hp fan will require a new VFD and rework of the control points.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
🔗Related Projects
👤Same Owner
$4.7M total📄Related City Permits
Building permits found at or near this location
Cap Off W/WW
Demolition of an office building metal shop building three storage structures and a pole barn totaling approximately 3809 sq. ft. Circa 1972 2025 130394 DA - Approved ***The building shall not be demolished until after the contractor has fulfilled the neighbor notification requirements outlined in Steps 5 & 6 of the Demolition webpage.***
Replacement of existing steam to hot water heat exchanger skid system; building footprint remains unchanged.
Addition & Remodel for 1-story single family residence. Interior remodel inlcludes new windows & doors throughout the structure new flex space room half bath & laundry room. Addition of covered rear porch over existing slab. 4 bed 2.5 bath.
Construction of steel canopies over approximately 1112 existing parking spaces. (Reactivated after revision expanded the scope of project)