SAS FAB1 PCW Improvements
SAS FAB1 PCW Improvements is a renovation/alteration project at 12100 Samsung Blvd., Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2022). The project has an estimated value of $1.4M across about 1,000 sq ft.
Project Metrics
TDLR #TABS2022018767Project Closed
Project has been completed and closed
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 78754 (Austin)
One email per change. Unsubscribe in one click. Privacy.
SAS FAB1 PCW Improvements is a Renovation/Alteration project located at 12100 Samsung Blvd., Austin, TX 78754 in Austin, Texas. The project has an estimated value of $1.4M covering 1,000 sq ft. Samsung is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on May 11, 2022.
Frequently Asked Questions
What is SAS FAB1 PCW Improvements?
SAS FAB1 PCW Improvements is a renovation/alteration project at 12100 Samsung Blvd. in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Scope consists of providing the design for the removal and replacement of (1) heat exchanger and the upgrade of (1) existing heat exchanger with additional plates for the FABX PCW system.
Is SAS FAB1 PCW Improvements open in Austin?
Construction on SAS FAB1 PCW Improvements is complete — TDLR records show the project passed its required accessibility inspection in Dec 2022. The building is finished and very likely open.
Where is SAS FAB1 PCW Improvements located?
SAS FAB1 PCW Improvements is located at 12100 Samsung Blvd., Austin, TX, 78754, in Travis County.
Who is the owner or developer of SAS FAB1 PCW Improvements?
Samsung is the property owner/developer of record for SAS FAB1 PCW Improvements, per its TDLR project registration.
Who is the architect or design firm for SAS FAB1 PCW Improvements?
Fuse Architecture Studio is the design firm of record for SAS FAB1 PCW Improvements, according to its TDLR filing.
How much does SAS FAB1 PCW Improvements cost and how big is it?
SAS FAB1 PCW Improvements has an estimated construction value of $1.4M and approximately 1,000 square feet (about $1.45K/sqft), based on its TDLR filing.
Scope of Work
Scope consists of providing the design for the removal and replacement of (1) heat exchanger and the upgrade of (1) existing heat exchanger with additional plates for the FABX PCW system.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Compliance Timeline
Project Timeline
Filed
May 11, 2022
Review Complete
Inspection Complete
Closed
Dec 26, 2022
Related Projects
Same Owner
$84.7M totalRelated City Permits
Building permits found at or near this location
Replacement of complete existing central heat and air system with or without duct work HVAC change out is in the hallway of the 4th floor of the main office building. No unit number.
NEW RESIDENTIAL IRRIGATION SYSTEM
Installing a new irrigation system
1360BR NEW 3 BEDROOM 2 BATH SINGLE FAMILY RESIDENTIAL HOME WITH ATTACHED GARAGE COVERED FRONT PORCH AND REAR PATIO
Home builders loop Ref: 2026-063452 EP ETJ
Property Owner
Design Firm
Registered Accessibility Specialist
Travis County Economy
Explore Area
Watch all construction in 78754 (Austin)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.