Southwest Airlines aus Ramp Break Room Remodel is a renovation/alteration project at 3600 Presidential Blvd., Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2024). The project has an estimated value of $1.0M across about 5,000 sq ft.
Project has been completed and closed
Southwest Airlines aus Ramp Break Room Remodel is a Renovation/Alteration project located at 3600 Presidential Blvd., Austin, TX 78719 in Austin, Texas. The project has an estimated value of $1.0M covering 5,000 sq ft. Department of Aviation is the property owner and Bensaer LLC is the design firm of record. The project was registered with TDLR on August 1, 2022.
Southwest Airlines aus Ramp Break Room Remodel is a renovation/alteration project at 3600 Presidential Blvd. in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: THE FOLLOWING WORK IS WITHIN THE EXISTING BUILDING FOOTPRINT: DEMOLISHING ROOMS #WN 2436 AND #WN2437 AND EXPOSING 202 S.F. TO THE EXTERIOR; REMODELING 4,194 S.F. OF OFFICE AND BREAK ROOMS; EXPANDING BREAK ROOM BY 552 S.F.
Construction on Southwest Airlines aus Ramp Break Room Remodel is complete — TDLR records show the project passed its required accessibility inspection in Feb 2024. The building is finished and very likely open.
Southwest Airlines aus Ramp Break Room Remodel is located at 3600 Presidential Blvd., Austin, TX, 78719, in Travis County.
Department of Aviation is the property owner/developer of record for Southwest Airlines aus Ramp Break Room Remodel, per its TDLR project registration.
Bensaer LLC is the design firm of record for Southwest Airlines aus Ramp Break Room Remodel, according to its TDLR filing.
Southwest Airlines aus Ramp Break Room Remodel has an estimated construction value of $1.0M and approximately 5,000 square feet (about $200/sqft), based on its TDLR filing.
THE FOLLOWING WORK IS WITHIN THE EXISTING BUILDING FOOTPRINT: DEMOLISHING ROOMS #WN 2436 AND #WN2437 AND EXPOSING 202 S.F. TO THE EXTERIOR; REMODELING 4,194 S.F. OF OFFICE AND BREAK ROOMS; EXPANDING BREAK ROOM BY 552 S.F.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Aug 1, 2022
Review Complete
Inspection Complete
Closed
Feb 1, 2024
Building permits found at or near this location
Construction of structural towers attached to main terminal building stairwells and light poles to allow camera installation for Virtual Ramp Control System. Work proposed in electrical rooms IT rooms etc. with new conduits/circuits (power and signal) being run from those rooms. Mechanical work proposes installation of compressor systems that go with the camera houses. These are dedicated systems that SAAB maintains and do not connect to any HVAC or other airport mechanical systems. Infrastructure (electrical =mechanical) for powering and maintaining camera systems. [Airside Permits]
Remodel of existing office spaces for tenant who is expanding into adjacent suites. Access control requested.
Construction of structural towers attached to main terminal building stairwells and light poles to allow camera installation for Virtual Ramp Control System. Work proposed in electrical rooms IT rooms etc. with new conduits/circuits (power and signal) being run from those rooms. Mechanical work proposes installation of compressor systems that go with the camera houses. These are dedicated systems that SAAB maintains and do not connect to any HVAC or other airport mechanical systems. Infrastructure (electrical =mechanical) for powering and maintaining camera systems. [Airside Permits]
Interior renovations with an existing building for virtual ramp control system improvements. Electrical and communications work proposed (3011 Employee Ave). [Landside Permits]
(3600 Presidential Blvd) Interior renovations within an existing building for virtual ramp control system improvements; includes finishing of existing space (paint carpet electrical desk and monitor installation) for control room. Electrical and communications (2901 Employee Ave) Interior renovations with an existing building for virtual ramp control system improvements. Electrical and communications work proposed (3011 Employee Ave). [Control Rooms Permits]
