Construction complete · Mar 2024🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Parts ASAP

4521 N. US HWY 67, STE 200, Midlothian, TX 76065, Midlothian, TX, 76065

Parts ASAP is a new construction project at 4521 N. US HWY 67, STE 200, Midlothian, in Ellis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Mar 2024). The project has an estimated value of $80K across about 93,797 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2024010236

$80K

Project Value

93,797

Square Feet

$1/sqft

Cost/SqFt

1 months

Duration

Registered:Jan 26, 2024

Start:Feb 19, 2024

Target:Mar 29, 2024

🏁

Project Closed

Project has been completed and closed

Parts ASAP is a New Construction project located at 4521 N. US HWY 67, STE 200, Midlothian, TX 76065 in Midlothian, Texas. The project has an estimated value of $80K covering 93,797 sq ft. Velocis Temple JV, LP is the property owner and Ware Malcomb is the design firm of record. The project was registered with TDLR on January 26, 2024.

❓Frequently Asked Questions

What is Parts ASAP?

Parts ASAP is a new construction project at 4521 N. US HWY 67, STE 200 in Midlothian, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 1st generation tenant finish out within an existing warehouse building shell and office space. Project consists of only warehouse tenant finish out

Is Parts ASAP open in Midlothian?

Construction on Parts ASAP is complete — TDLR records show the project passed its required accessibility inspection in Mar 2024. The building is finished and very likely open.

Where is Parts ASAP located?

Parts ASAP is located at 4521 N. US HWY 67, STE 200, Midlothian, TX, 76065, in Ellis County.

Who is the owner or developer of Parts ASAP?

Velocis Temple JV, LP is the property owner/developer of record for Parts ASAP, per its TDLR project registration.

Who is the architect or design firm for Parts ASAP?

Ware Malcomb is the design firm of record for Parts ASAP, according to its TDLR filing.

How much does Parts ASAP cost and how big is it?

Parts ASAP has an estimated construction value of $80K and approximately 93,797 square feet (about $1/sqft), based on its TDLR filing.

📋Scope of Work

1st generation tenant finish out within an existing warehouse building shell and office space. Project consists of only warehouse tenant finish out

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.