Construction complete · May 2026✅Inspection Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Oakbend Industrial

420 Oakbend Drive, Lewisville, TX 75067, Lewisville, TX, 75067

Oakbend Industrial is a new construction project at 420 Oakbend Drive, Lewisville, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed May 2026). The project has an estimated value of $9.8M across about 106,233 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2025008247

$9.8M

Project Value

106,233

Square Feet

$92/sqft

Cost/SqFt

11 months

Duration

Registered:Dec 20, 2024

Start:Mar 1, 2025

Target:Jan 31, 2026

✅

Inspection Complete

Final inspection completed, awaiting project closure

Oakbend Industrial is a New Construction project located at 420 Oakbend Drive, Lewisville, TX 75067 in Lewisville, Texas. The project has an estimated value of $9.8M covering 106,233 sq ft. CH Realty X-GAPI DFW Oakbend, LP is the property owner and Pross Design Group, Inc. is the design firm of record. The project was registered with TDLR on December 20, 2024.

❓Frequently Asked Questions

What is Oakbend Industrial?

Oakbend Industrial is a new construction project at 420 Oakbend Drive in Lewisville, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Two, one-story, 28' clear height spec office / warehouse buildings. Building 1 - 68,306 SF. Building 2 - 37,927 SF

Is Oakbend Industrial open in Lewisville?

Construction on Oakbend Industrial is complete — TDLR records show the project passed its required accessibility inspection in May 2026. The building is finished and very likely open.

Where is Oakbend Industrial located?

Oakbend Industrial is located at 420 Oakbend Drive, Lewisville, TX, 75067, in Dallas County.

Who is the owner or developer of Oakbend Industrial?

CH Realty X-GAPI DFW Oakbend, LP is the property owner/developer of record for Oakbend Industrial, per its TDLR project registration.

Who is the architect or design firm for Oakbend Industrial?

Pross Design Group, Inc. is the design firm of record for Oakbend Industrial, according to its TDLR filing.

How much does Oakbend Industrial cost and how big is it?

Oakbend Industrial has an estimated construction value of $9.8M and approximately 106,233 square feet (about $92/sqft), based on its TDLR filing.

📋Scope of Work

Two, one-story, 28' clear height spec office / warehouse buildings. Building 1 - 68,306 SF. Building 2 - 37,927 SF

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.