Construction complete · May 2026✅Inspection Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Artivo Surfaces

440 Oakbend Drive, Lewisville, TX 75067, Lewisville, TX, 75067

Artivo Surfaces is a new construction project at 440 Oakbend Drive, Lewisville, in Denton County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed May 2026). The project has an estimated value of $417K across about 37,927 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2026003172

$417K

Project Value

37,927

Square Feet

$11/sqft

Cost/SqFt

4 months

Duration

Registered:Oct 10, 2025

Start:Dec 10, 2025

Target:Apr 1, 2026

✅

Inspection Complete

Final inspection completed, awaiting project closure

Artivo Surfaces is a New Construction project located at 440 Oakbend Drive, Lewisville, TX 75067 in Lewisville, Texas. The project has an estimated value of $417K covering 37,927 sq ft. CH Realty X-GAPI DFW Oakbend, LP is the property owner and Pross Design Group, Inc. is the design firm of record. The project was registered with TDLR on October 10, 2025.

❓Frequently Asked Questions

What is Artivo Surfaces?

Artivo Surfaces is a new construction project at 440 Oakbend Drive in Lewisville, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior Finish-out for office, showroom, and warehouse use.

Is Artivo Surfaces open in Lewisville?

Construction on Artivo Surfaces is complete — TDLR records show the project passed its required accessibility inspection in May 2026. The building is finished and very likely open.

Where is Artivo Surfaces located?

Artivo Surfaces is located at 440 Oakbend Drive, Lewisville, TX, 75067, in Denton County.

Who is the owner or developer of Artivo Surfaces?

CH Realty X-GAPI DFW Oakbend, LP is the property owner/developer of record for Artivo Surfaces, per its TDLR project registration.

Who is the architect or design firm for Artivo Surfaces?

Pross Design Group, Inc. is the design firm of record for Artivo Surfaces, according to its TDLR filing.

How much does Artivo Surfaces cost and how big is it?

Artivo Surfaces has an estimated construction value of $417K and approximately 37,927 square feet (about $11/sqft), based on its TDLR filing.

📋Scope of Work

Interior Finish-out for office, showroom, and warehouse use.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.