Opening ~Dec 2029📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

SAS FAB1 Waste Tank Expansion

12100 Samsung Blvd, Austin, TX 78754, Austin, TX, 78754

SAS FAB1 Waste Tank Expansion is a renovation/alteration project at 12100 Samsung Blvd, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Dec 2029. The project has an estimated value of $12.0M across about 3,750 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026008869

$12.0M

Project Value

3,750

Square Feet

$3.20K/sqft

Cost/SqFt

4y 3mo

Duration

Registered:Dec 23, 2025

Start:Oct 15, 2025

Target:Dec 15, 2029

Remaining:1249 days

📝

Review Complete

Design review complete, construction may proceed

SAS FAB1 Waste Tank Expansion is a Renovation/Alteration project located at 12100 Samsung Blvd, Austin, TX 78754 in Austin, Texas. The project has an estimated value of $12.0M covering 3,750 sq ft. SAMSUNG AUSTIN SEMICONDUCTOR is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on December 23, 2025.

❓Frequently Asked Questions

What is SAS FAB1 Waste Tank Expansion?

SAS FAB1 Waste Tank Expansion is a renovation/alteration project at 12100 Samsung Blvd in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Scope consists of issuing IFC set and providing CA for a permanent swing tank within a new containment area connected to the original FAB1 FWW and AWW transfer tank containment.

Is SAS FAB1 Waste Tank Expansion open in Austin?

SAS FAB1 Waste Tank Expansion is still under construction in Austin, TX, with an estimated completion of Dec 2029 according to its TDLR registration.

Where is SAS FAB1 Waste Tank Expansion located?

SAS FAB1 Waste Tank Expansion is located at 12100 Samsung Blvd, Austin, TX, 78754, in Travis County.

Who is the owner or developer of SAS FAB1 Waste Tank Expansion?

SAMSUNG AUSTIN SEMICONDUCTOR is the property owner/developer of record for SAS FAB1 Waste Tank Expansion, per its TDLR project registration.

Who is the architect or design firm for SAS FAB1 Waste Tank Expansion?

Fuse Architecture Studio is the design firm of record for SAS FAB1 Waste Tank Expansion, according to its TDLR filing.

How much does SAS FAB1 Waste Tank Expansion cost and how big is it?

SAS FAB1 Waste Tank Expansion has an estimated construction value of $12.0M and approximately 3,750 square feet (about $3.20K/sqft), based on its TDLR filing.

📋Scope of Work

Scope consists of issuing IFC set and providing CA for a permanent swing tank within a new containment area connected to the original FAB1 FWW and AWW transfer tank containment.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.