Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

SSF Imported Auto Parts

1460 N Post Oak Rd, Houston, TX 77055, Houston, TX, 77055

SSF Imported Auto Parts is a renovation/alteration project at 1460 N Post Oak Rd, Houston, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $167K across about 16,262 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026011155

$167K

Project Value

16,262

Square Feet

$10/sqft

Cost/SqFt

0 months

Duration

Registered:Jan 28, 2026

Start:Feb 10, 2026

Target:Feb 24, 2026

📝

Review Complete

Design review complete, construction may proceed

SSF Imported Auto Parts is a Renovation/Alteration project located at 1460 N Post Oak Rd, Houston, TX 77055 in Houston, Texas. The project has an estimated value of $167K covering 16,262 sq ft. SECURITY CAPITAL IND TRUST is the property owner and Seizmic Inc. is the design firm of record. The project was registered with TDLR on January 28, 2026.

❓Frequently Asked Questions

What is SSF Imported Auto Parts?

SSF Imported Auto Parts is a renovation/alteration project at 1460 N Post Oak Rd in Houston, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Installation of Low Pile Racking (11,137.5sq/ft) and Boltless Shelving (5,125.25sq/ft) . No storage over 12', no fluid storage above 6'.

Is SSF Imported Auto Parts open in Houston?

SSF Imported Auto Parts is currently under construction in Houston, TX. Its current TDLR status is "Review Complete".

Where is SSF Imported Auto Parts located?

SSF Imported Auto Parts is located at 1460 N Post Oak Rd, Houston, TX, 77055, in Harris County.

Who is the owner or developer of SSF Imported Auto Parts?

SECURITY CAPITAL IND TRUST is the property owner/developer of record for SSF Imported Auto Parts, per its TDLR project registration.

Who is the architect or design firm for SSF Imported Auto Parts?

Seizmic Inc. is the design firm of record for SSF Imported Auto Parts, according to its TDLR filing.

How much does SSF Imported Auto Parts cost and how big is it?

SSF Imported Auto Parts has an estimated construction value of $167K and approximately 16,262 square feet (about $10/sqft), based on its TDLR filing.

📋Scope of Work

Installation of Low Pile Racking (11,137.5sq/ft) and Boltless Shelving (5,125.25sq/ft) . No storage over 12', no fluid storage above 6'.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.