Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Phase 1 Pushback Racking

🗂️ View unified construction timeline →

3776 Pegasus Dr, Temple, TX 76501, Temple, TX, 76501

Phase 1 Pushback Racking is a new construction project at 3776 Pegasus Dr, Temple, in Bell County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $1.4M across about 38,835 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026015330

$1.4M

Project Value

38,835

Square Feet

$35/sqft

Cost/SqFt

2 months

Duration

Registered:Mar 18, 2026

Start:Apr 27, 2026

Target:Jun 12, 2026

📝

Review Complete

Design review complete, construction may proceed

Phase 1 Pushback Racking is a New Construction project located at 3776 Pegasus Dr, Temple, TX 76501 in Temple, Texas. The project has an estimated value of $1.4M covering 38,835 sq ft. Pactiv LLC is the property owner and Seizmic Inc. is the design firm of record. The project was registered with TDLR on March 18, 2026.

❓Frequently Asked Questions

What is Phase 1 Pushback Racking?

Phase 1 Pushback Racking is a new construction project at 3776 Pegasus Dr in Temple, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Installation of new pallet racking storage system inside an existing warehouse facility. No change in occupancy. All work will take place inside the existing warehouse. No plumbing, electrical, or mechanical work is included in this scope.

Is Phase 1 Pushback Racking open in Temple?

Phase 1 Pushback Racking is currently under construction in Temple, TX. Its current TDLR status is "Review Complete".

Where is Phase 1 Pushback Racking located?

Phase 1 Pushback Racking is located at 3776 Pegasus Dr, Temple, TX, 76501, in Bell County.

Who is the owner or developer of Phase 1 Pushback Racking?

Pactiv LLC is the property owner/developer of record for Phase 1 Pushback Racking, per its TDLR project registration.

Who is the architect or design firm for Phase 1 Pushback Racking?

Seizmic Inc. is the design firm of record for Phase 1 Pushback Racking, according to its TDLR filing.

How much does Phase 1 Pushback Racking cost and how big is it?

Phase 1 Pushback Racking has an estimated construction value of $1.4M and approximately 38,835 square feet (about $35/sqft), based on its TDLR filing.

📋Scope of Work

Installation of new pallet racking storage system inside an existing warehouse facility. No change in occupancy. All work will take place inside the existing warehouse. No plumbing, electrical, or mechanical work is included in this scope.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.