Opening ~Oct 2026📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

ROBOTICS MAKER LAB

2991 N. HARDIN BLVD #600, Mckinney, TX 75071, Mckinney, TX, 75071

ROBOTICS MAKER LAB is a renovation/alteration project at 2991 N. HARDIN BLVD #600, Mckinney, in Collin County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Oct 2026. The project has an estimated value of $100K across about 1,200 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026014864

$100K

Project Value

1,200

Square Feet

$83/sqft

Cost/SqFt

3 months

Duration

Registered:Mar 12, 2026

Start:Jul 1, 2026

Target:Oct 5, 2026

Remaining:42 days

📝

Review Complete

Design review complete, construction may proceed

Follow this project

Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.

Or watch all projects in 75071 (Mckinney)

One email per change. Unsubscribe in one click. Privacy.

ROBOTICS MAKER LAB is a Renovation/Alteration project located at 2991 N. HARDIN BLVD #600, Mckinney, TX 75071 in Mckinney, Texas. The project has an estimated value of $100K covering 1,200 sq ft. Shops at Wilmeth is the property owner and JAX DESIGN STUDIO, LLC is the design firm of record. The project was registered with TDLR on March 12, 2026.

❓Frequently Asked Questions

What is ROBOTICS MAKER LAB?

ROBOTICS MAKER LAB is a renovation/alteration project at 2991 N. HARDIN BLVD #600 in Mckinney, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: FINISH OUT FOR A ROBOTICS LAB

Is ROBOTICS MAKER LAB open in Mckinney?

ROBOTICS MAKER LAB is still under construction in Mckinney, TX, with an estimated completion of Oct 2026 according to its TDLR registration.

Where is ROBOTICS MAKER LAB located?

ROBOTICS MAKER LAB is located at 2991 N. HARDIN BLVD #600, Mckinney, TX, 75071, in Collin County.

Who is the owner or developer of ROBOTICS MAKER LAB?

Shops at Wilmeth is the property owner/developer of record for ROBOTICS MAKER LAB, per its TDLR project registration.

Who is the architect or design firm for ROBOTICS MAKER LAB?

JAX DESIGN STUDIO, LLC is the design firm of record for ROBOTICS MAKER LAB, according to its TDLR filing.

How much does ROBOTICS MAKER LAB cost and how big is it?

ROBOTICS MAKER LAB has an estimated construction value of $100K and approximately 1,200 square feet (about $83/sqft), based on its TDLR filing.

📋Scope of Work

FINISH OUT FOR A ROBOTICS LAB

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.